Printable Transfers for Light Materials

Our inkjet printable transfers for Light Materials make it easy to create your own printed image for application to light colored materials ranging from white to about lighter pastel colors.  The unique polymer StarCraft uses actually transfers the inkjet printed image to the garment.  A heat press is recommended for applying this product because of temperature and pressure requirements.  When applying to colored garments you may see the polymer where no ink is printed around the image–this will fade and soften after the garment is washed once or twice.   Sold in 8 1/2″ x 11″ sheets, this product is perfect for standard inkjet printers of all types.

StarCraft Transfers for Light Materials are easy to identify by the green logo printed on the back of each sheet as well as the green instructions.

Click here for help deciding which transfer material is right for your application

Application and Care Instructions

  • Press at 375 Degrees for 30 Seconds under HIGH pressure
  • Immediately Peel HOT
  • To wash, turn garment inside out, wash in cold water.  Do not bleach.
  • Tumble dry low heat (hang dry recommended).
  • If ironing, do NOT iron directly on the applied image.

Click here to see a video


Click on the slides below for a step-by-step guide of how to use this product.